Advanced Level     Skills: 8051, LCD, I2C, EEPROM, OptoCoupler, Keypad    
Author

Description

Electronic Voting Machine with Managed Control Unit


Introduction:
EVM is capable of saving considerable printing stationery and transport of large volumes of electoral material. It is easy to transport, store, and maintain. It completely rules out the chance of invalid votes. Its use results in reduction of polling time, resulting in fewer problems in electoral preparations, law and order, candidates' expenditure, etc. and easy and accurate counting without any mischief at the counting centre. It is also eco friendly.

Our EVM consists mainly of two units - (a) Control Unit (CU) and (b) Ballot Unit (BU) with cable for connecting it with Control unit. Both the units consists of one microcontroller (8052) each. The CU consists of one LCD, one hex keypad and a couple of switches, while BU consists of a candidate panel, a votecast panel and a buzzer, etc.

This project is based on assembly language programming. The software platform used in this project are Keil uVision3 and SPIPGM37.

Important Information:
Please Read this carefully as explained to me by author

i forgot to mention one thing missing in report n coding as well.
actually, in main function of control unit program as soon as controller
enters in it check the value of variable named "status" that resides in
EEPROM. If status is 1 then voting start else no voting.

if the EEPROM is new or fresh, status will have some garbage value
or 0xFF. which can be a problem on first startup.

So a small program is written to clear that status byte.

After you finish making the hardware. You have to do the following things:

1. Load cufirst.hex file in your controller.
2. Run your circuit.
3. Wait for 2-3 seconds.
4. Load voting.hex which is the real control unit program.
5. Run it.

author



What's New?
1. Schematic updated
2. Added proteus simulation if you want to try it before building it

Please use forum if you have any problem.
www.8051projects.net/forum.html

  Filesize

1.56 MB

  Downloads

287491

  Rating
 

Comments

A basit
17 Apr 2016: 09:33 AM
have you pcb of this project ?
if yes, please send me
i will very thankful to you
[email protected]
  
olaolekan
16 Sep 2016: 15:40 PM
it is nice job. I try to loaf the program as directed but it does not program the voting hex after I programmed the cufirst.hex. what is the meaning of lock_bit1 and lock_bit 2
  
gigyani
18 Apr 2019: 02:17 AM
STATREAD:

MOV A, #WTCMD ;LOAD WRITE COMMAND
CALL OUTS
MOV A, #00H
CALL OUT
CALL CREAD
MOV A, R1
MOV STATUS, A
RET

it give me the error A45 everywhere,this line, MOV A, #WTCMD , wrote.
please send me the code for control unit.
  
(Required; Min length 5)
(Required; will not be displayed)

Conversation

Mon Dec 06 2021, 05:17 PM
Iola Gott
I'd like to ask you a question. Would you be interested in having me promote your site and you don't have to pay unless I get you results? Can we do a call this week so I can explain how it works? Email me here: [email protected]
Sun Dec 05 2021, 09:58 PM
Sophia Scott
Click the link below to view the message and reply to her.
Sun Dec 05 2021, 07:22 PM
Kia
Hello there! This post could not be written much better! Going through this article reminds me of my previous roommate! He always kept preaching about this. I most certainly will send this post to him. Fairly certain he'll have a very good read. Thank you for sharing! https://comprarcialis5mg.org/it/cialis-5-mg-effetti-collaterali/ http://beans.s24.xrea.com/cgi-bin/apeboardp/apeboard_plus.cgi effetti collaterali del cialis 20 mg
Sun Dec 05 2021, 06:59 PM
Amelie
Heya i am for the first time here. I came across this board and I in finding It really useful & it helped me out a lot. I hope to give something again and aid others like you helped me. https://comprarcialis5mg.org/it/comprare-spedra-avanafil-senza-ricetta-online/ http://bsiuntag-sby.com/halkomentar-175-posting-blog-melalui-microsoft-576.html spedra ravenna
Sat Dec 04 2021, 07:47 PM
cjeeoeajau
hotlnflsty

Downloads

Comments

Mirza123
Thu Jun 25 2020, 03:46 PM
eunicelove124
Mon Jun 22 2020, 03:03 PM
cerouno
Tue Jun 16 2020, 05:10 PM
Marce
Sat Jun 13 2020, 09:43 PM
Davidthils
Thu May 21 2020, 12:44 PM
Jakeror
Thu May 21 2020, 01:28 AM
motorCar
Wed May 20 2020, 07:05 PM
Vordrync
Wed May 20 2020, 11:52 AM

Online

Guests: 69, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38215
Newest member: Mirza123