T290i gprs connection
Discussion in "Embedded GSM Development" started by turker1 Jul 5, 2009.
Sun Jul 05 2009, 12:23 am
Hi.I want to make gprs connection.
With hyperterminal i am getting these messages.
at+cgatt=1
OK
at+cgdcont=1,"IP","internet"
OK
at+cstt="internet","gprs","gprs"
ERROR
why error? what is the problem?
With hyperterminal i am getting these messages.
at+cgatt=1
OK
at+cgdcont=1,"IP","internet"
OK
at+cstt="internet","gprs","gprs"
ERROR
why error? what is the problem?
Mon Jul 06 2009, 04:34 pm
I think you are using wrong command.
CSTT is for Simcom modem not for T290i mobile.
check sony erricsson command list here:
AT Command list for ALL Sony Ericsson mobile phones
check the GPRS section for correct commands.
Tags AT Command list ALL Sony Ericsson mobileT209 AT Command list
CSTT is for Simcom modem not for T290i mobile.
check sony erricsson command list here:
AT Command list for ALL Sony Ericsson mobile phones
check the GPRS section for correct commands.
Powered by e107 Forum System
Robertphype
Sat Apr 27 2024, 12:23 am
ktaletrryp
Fri Apr 26 2024, 10:55 pm
Robertrip
Fri Apr 26 2024, 11:20 am
ArnoldDiant
Fri Apr 26 2024, 03:53 am
RodneyKnorb
Thu Apr 25 2024, 07:08 pm
Williamjef
Thu Apr 25 2024, 02:08 pm
SamuelSmise
Thu Apr 25 2024, 09:56 am
DustinErele
Thu Apr 25 2024, 08:44 am