USB interfacing of LPC2378 with PC
Discussion in "ARM Development" started by sukhdeep May 18, 2009.
Mon May 18 2009, 06:06 pm
Hi everybody,
I have never done any usb interfacing with any microcontroller. I want to interface LPC2378 using USB port to PC. Kindly tell me, how can i do this.
Thanks
Sukhdeep Singh
I have never done any usb interfacing with any microcontroller. I want to interface LPC2378 using USB port to PC. Kindly tell me, how can i do this.
Thanks
Sukhdeep Singh
Mon May 18 2009, 06:13 pm
you need to understand the communication between USB host controller and USB Controller. this page might be helpful to you.
http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/#at91examples
But i should recommend you to first read about USB. you can download documents related to USB 2.0 from http://usb.org
http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/#at91examples
But i should recommend you to first read about USB. you can download documents related to USB 2.0 from http://usb.org
Mon May 18 2009, 06:18 pm
1. Read the USB Protocol by USB Complete by Jan Axelson
2. After that If you are not familiar with drivers in Windows or Linux then goto simple
HID Interface
2. After that If you are not familiar with drivers in Windows or Linux then goto simple
HID Interface
[ Edited Mon May 18 2009, 06:22 pm ]
Mon May 18 2009, 06:21 pm
yes USB Complete is best book to read. go for it..
search if forum maybe you can find it..
search if forum maybe you can find it..
Powered by e107 Forum System