Discussion in "ARM Development" started by    shyam    Sep 21, 2007.
Fri Sep 21 2007, 05:21 PM
#11
the only problem is lpc do not come in dip packages
so we have to go for smd soldering of the ic
Fri Sep 21 2007, 05:23 PM
#12
that is not a problem for me i soldered many ICs SMD. I have a good soldering station too

I tried the NXP website but samples are not available anymore and i don't know where to get ARM from :|
Fri Sep 21 2007, 05:26 PM
#13
now installing winArm===>
extract winarm in c drive or copy extracted winarm in c:
right click mycomputer=>properties=>advanced=>environment variables=>Path(doubleclick)
add ;C:\WinARM\bin;C:\WinARM\arm-elf\bin;C:\WinARM\utils\bin;C:\WinARM\pn;
do not forget the semicolons to seperate the directories
Fri Sep 21 2007, 05:28 PM
#14
it is available aplenty from nxp mumbai
and even in pune,
hope u can come up some time....
Fri Sep 21 2007, 05:31 PM
#15
hmm.. i cannot lol!

Hey i forgot to tell you the best tool i used!!!!!!
its Cygwin have you heard of it?

its linux simulation tool on windows. So you can program like you do in linux. i actually used it when working on PowerPC. it can be used for ARM too. As you know linux can be used to compile for 16 different kind of targets so.. we can make use of cygwin to directly generate the output file..
Fri Sep 21 2007, 05:32 PM
#16
are u going to discuss ARM from basics or wat?
Fri Sep 21 2007, 05:34 PM
#17
of course from basics... we are all going to learn the basic thing we always need is.. Development board, IDE etc.. only after that you can start doing something isn't it?
Fri Sep 21 2007, 05:36 PM
#18
yes abbas
we shall discuss arm from basic.
but the discussion has not yet started
Fri Sep 21 2007, 05:38 PM
#19
yeah this is just an initial spark of the discussion and i think everyone want to learn
Fri Sep 21 2007, 05:40 PM
#20
yes we can use cygwin no doubt...
i have used cygwin in the past..
works fine
but i had problem in the Interrupt sections...
and trust me winarm is almost the same as using cygwin only thing is that here u have a make file instead of a batch file
and i can say repeatedly winArm has been the best for me for over a year now

Get Social

Information

Powered by e107 Forum System

Conversation

Tue May 04 2021, 08:34 PM
Chastity
Hi there! I could have sworn I've been to this site before but after browsing through some of the post I realized it's new to me. Anyways, I'm definitely glad I found it and I'll be book-marking and checking back frequently! check my score https://creditscorecheckn.com
Tue May 04 2021, 06:39 PM
Clarence
What's up everyone, it's my first go to see at this web page, and post is really fruitful in support of me, keep up posting these types of articles. Best Credit Score https://creditscoresids.com
Tue May 04 2021, 01:13 PM
Jerold
What's up to all, the contents present at this site are really remarkable for people knowledge, well, keep up the good work fellows. karma credit score https://getcreditscoreww.com
Tue May 04 2021, 09:49 AM
Shonda
I like the helpful info you provide in your articles. I will bookmark your blog and check again here frequently. I am quite certain I'll learn many new stuff right here! Good luck for the next! check credit report https://creditreportuss.com
Tue May 04 2021, 06:28 AM
Lucia
I am not sure where you are getting your info, but great topic. I needs to spend some time learning more or understanding more. Thanks for wonderful information I was looking for this info for my mission. monthly credit report https://checkcreditscore24.com

Downloads

Comments

Mirza123
Thu Jun 25 2020, 03:46 PM
eunicelove124
Mon Jun 22 2020, 03:03 PM
cerouno
Tue Jun 16 2020, 05:10 PM
Marce
Sat Jun 13 2020, 09:43 PM
Davidthils
Thu May 21 2020, 12:44 PM
Jakeror
Thu May 21 2020, 01:28 AM
motorCar
Wed May 20 2020, 07:05 PM
Vordrync
Wed May 20 2020, 11:52 AM

Online

Guests: 63, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38215
Newest member: Mirza123