Sir Ajay Please Help us in HOME AUTOMATION OVER INTERNET
AHSAN JALIL
SHAROON SALEEM
WAQAR AMIN
sir plz give us the software as early as possible.we will be highly thankful to you.
waiting for your response.
take care
all project members!
please check back soon
regards,
ajay bhargav
please sorry for that last line coz of my friend Zongwit. i cant remove it.
but i think i kept it pretty small so that it will be only for you.
enjoy and best of luck!
[ Edited Mon Jul 17 2006, 02:02 am ]
hi sir.thnx a lot for your support for the server.we had build the circuit according to your diagram and code for microcontroller.we had tried to connect it.but it is not working.please tell us what are the complete commands to turn the devices on and off.and our led's are glowing when we just supply the voltage .so is it right or there is some problem with it.if it is then where it will be.please help us in trouble shooting it.where should be the problem.plz reply.take care.bye
Ahsan
check your circuit. there might be some wrong connection. the leds should not glow.
make sure connections are correct and dont forget to check the reset circuitry..
when we connect to server from local ip to localhost.it does not even show the status by stat command.nor the help by ? command and the server just shows that received stat.received bulb etc..but doesnot display anything else.so wat can be the problem.so please help us.take care bye.
Ahsan
then your serial communication is not working..
check serial communication using hyper terminal.. press ? two three times or press enter two three times.. if you see smthing on hyper terminal then your serial communication is working other wise not.. so first check the serial communication.