Keil-MDK ~ STM32L Simulation Problem
Discussion in "ARM Development" started by sakibnaz Dec 25, 2011.
Sun Dec 25 2011, 02:36 am
Hello all.
Is it possible to simulate STM32L152RB with Keil-MDK? I am trying ... but during simulation no Peripherals are available.
But the simulation working fine with all Peripherals for STM32F103RB.
Any suggestion ...
Thanks.
Sakibnaz.
Is it possible to simulate STM32L152RB with Keil-MDK? I am trying ... but during simulation no Peripherals are available.
But the simulation working fine with all Peripherals for STM32F103RB.
Any suggestion ...
Thanks.
Sakibnaz.
Sun Jan 08 2012, 03:17 am
see the difference in STM32x103 or 107 or 100 controller if they are having similar hardware modules like uart, SPI etc.. use the one which has simulation available this will help you atleast to test your code.
Sun Jan 08 2012, 04:03 am
Ajay, thanks for your reply.
I did some research ... Keil only support simulation for STM32F103XX and STM32F107XX but not for STM32L152XX
Anyway, I have decided to use F103RB as its the mainstream MCU and have good support on both simulation and source.
Anyone ... uses the Discovery Value Line Kit? I'll be glad to know, if anyone can advice me the general current consumption of that Kit.
-Sakibnaz.
I did some research ... Keil only support simulation for STM32F103XX and STM32F107XX but not for STM32L152XX
Anyway, I have decided to use F103RB as its the mainstream MCU and have good support on both simulation and source.
Anyone ... uses the Discovery Value Line Kit? I'll be glad to know, if anyone can advice me the general current consumption of that Kit.
-Sakibnaz.
Wed Jan 18 2012, 06:54 pm
@sakibnaz.. I have not used that kit and I dont see anyone here on forum (i know) used it
you can ask doubts incase you have any.
you can ask doubts incase you have any.
Powered by e107 Forum System