Flyback transformer
Discussion in "Electronics" started by nisargpatel Jul 1, 2014.
Tue Jul 01 2014, 11:34 am
Hi
does any one have idea to design flyback transformer used in SMPS.....? winding details core selection etc.
does any one have idea to design flyback transformer used in SMPS.....? winding details core selection etc.
Fri Jul 04 2014, 03:37 am
It's a very big and complicated subject.
I think you need to be prepared to do a lot of reading.
If you have a specific question one of our members may be able to help.
I think you need to be prepared to do a lot of reading.
If you have a specific question one of our members may be able to help.
Mon Jul 07 2014, 02:27 pm
yes i know that its a big topic but i have read lots of things related to that, for that there are lots of manufacturers have give their application notes like microsemi, maxim, fairchild, international rectifiers etc
the main thing is core selection and winding details , in winding details there is complex calculations and above all have given that calculation in their app notes but their equations are different , the parameter consideration is different
so problem is that what are the minimum things i have to take in account for winding details...
further more ideally for flybacks 1 volt = 1 turn ..........but as we know its IDEALLY ......! NOT PRACTICALLY
the main thing is core selection and winding details , in winding details there is complex calculations and above all have given that calculation in their app notes but their equations are different , the parameter consideration is different
so problem is that what are the minimum things i have to take in account for winding details...
further more ideally for flybacks 1 volt = 1 turn ..........but as we know its IDEALLY ......! NOT PRACTICALLY
Powered by e107 Forum System