Discussion in "Electronics" started by    mohitsofat    Aug 4, 2014.
Mon Aug 04 2014, 02:00 pm
#1

Hi All can any body Post a circuit of 12 volt automatic changeover switch. I am even ready to pay some amount if anybody able to make it for me. Purpose is i have 2 battery Banks and currently i am manually switching it to 2nd one. I need to automate it so that switching is done automatically.
Tue Aug 05 2014, 04:25 pm
#2
look at ckt here is working...
here switch is acting as changeover switch. i.e when u dont give 12v to it ,its in normally closed mode..it means 2nd battery is connected.
So whenever u want to switch from 2nd battery to 1st battery then just give 12v to switch i.e, turn on relay ,now 1st battery will be connected. Thats it!!!
here is relay -


Sun Aug 10 2014, 04:17 am
#3
I have not tested this circuit, but the principle should work !
Some values may need adjusting, ie change R1 to 150 ohms.




[ Edited Fri Aug 15 2014, 01:50 am ]

Get Social

Information

Powered by e107 Forum System

Downloads

Comments

Michailqfh
Fri Mar 29 2024, 01:53 am
Bobbyerilar
Thu Mar 28 2024, 08:08 am
pb58
Thu Mar 28 2024, 05:54 am
Clarazkafup
Thu Mar 28 2024, 02:24 am
Walterkic
Thu Mar 28 2024, 01:19 am
Davidusawn
Wed Mar 27 2024, 08:30 pm
Richardsop
Tue Mar 26 2024, 10:33 pm
Stevencog
Tue Mar 26 2024, 04:26 pm