Discussion in "Project Help" started by    akshayylr    Jan 28, 2018.
Sun Jan 28 2018, 10:23 am
#1
this is my code, this piece gets to work well in software simulation but not on the board.how can i get it working on the board??


#include<reg51.h>
sbit party1=P1^0;
sbit party2=P1^1;
sbit result1=P1^2;
sbit result2=P1^3;
sbit display1=P1^4;
sbit display2=P1^5;
sbit display3=P1^6;
sbit display4=P1^7;
void delay(int max)
{
int i=0,j=0;
for(i=0;i<max;i++)
{
for(j=0;j<12345;j++);
}
}
void main()
{
unsigned int temp1=0,temp2=0,count11=0,count12=0,count13=0,count14=0,count21=0,count22=0,count23=0,count24=0;
int a[]={0x3f,0x06,0x5b,0x4f,0xe6,0xed,0x7d,0x07,0xff,0xef};
while(1)
{
// party1=party2=result1=result2=1;
while(party1==0&&party2==1&&result1==1&&result2==1 )
{
temp1++;
}
while(party2==0&&party1==1&&result1==1&&result2==1 )
{
temp2++;
}
count11=count11+(temp1/temp1);
if(count11==9)
{
count12++;
count11=0;
if(count12==9)
{
count13++;
count12=0;
if(count13==9)
{
count14++;
count13=0;
}
}
}
count21=count21+(temp2/temp2);
if(count21==9)
{
count22++;
count21=0;
if(count22==9)
{
count23++;
count22=0;
if(count23==9)
{
count24++;
count23=0;
}
}
}

temp1=0;
temp2=0;
P2=0X00;
while(result1==0&&party2==1&&party1==1&&result2==1)
{
display1=1;
P2=a[count11];
delay(5);

display2=1;
P2=a[count12];
delay(5);

display3=1;
P2=a[count13];
delay(5);

display4=1;
P2=a[count14];
delay(5);

}
while(result2==0&&party2==1&&party1==1&&result1==1)
{
display1=1;
P2=a[count21];
delay(5);

display2=1;
P2=a[count22];
delay(5);

display3=1;
P2=a[count23];
delay(5);

display4=1;
P2=a[count24];
delay(5);

}
}
}





[ Edited Sun Jan 28 2018, 10:25 am ]
Thu Feb 01 2018, 02:27 am
#2
You will have to post your full code and the Proteus file.
Most likely you have a hardware problem, such as a pin not connected.
Thu Feb 01 2018, 03:27 pm
#3


You will have to post your full code and the Proteus file.
Most likely you have a hardware problem, such as a pin not connected.

ExperimenterUK


This is the full program and can I know what are this Proteus file
Thu Feb 01 2018, 11:30 pm
#4
Your program did not attach.
Zip it before posting.

"can I know what are this Proteus file"
I assumed you were using Proteus software for your simulation.
Post what you can of your simulation so we can try to recreate what you are doing.
Again ,zip it before posting.

Get Social

Information

Powered by e107 Forum System

Downloads

Comments

Bobbyerilar
Thu Mar 28 2024, 08:08 am
pb58
Thu Mar 28 2024, 05:54 am
Clarazkafup
Thu Mar 28 2024, 02:24 am
Walterkic
Thu Mar 28 2024, 01:19 am
Davidusawn
Wed Mar 27 2024, 08:30 pm
Richardsop
Tue Mar 26 2024, 10:33 pm
Stevencog
Tue Mar 26 2024, 04:26 pm
Bernardwarge
Tue Mar 26 2024, 11:15 am