How to generate 0.01hz frequency in lpc214x

Hi,

I'm generating constant frequency of 1hz and variable frequency from 1hz to 10hz frequencies, using lpc214x MCU, but not able to get the pwm output of 0.01hz frequency, and is it possible to measure the same frequency in oscilloscope?
Please suggest.


Thank you

The lpc214x has a 32-bit prescaler , so I would expect 0.01hz
to be possible, but very coarse.
What is it for ?

How close can you get, can you post your code ?

0.01hz gives a period of 100 seconds, a stopwatch would be more use than
an oscilloscope.

Sorry for the delayed response sir, Below is the code which generates 1hz constant frequency, please find the attached code of 1hz pwm generation.

That generates 1hz frequency using prescaler value, actually I need to generate 9.62hz
frequency, i'm getting 9.6hz now, but to generate 9.62hz I need resolution of 0.02, so I asked for 0.01hz pwm generation..

Thank you

The code did not attach.
Try zipping it first.

Please find the attached zip code.

Attached code main.c only..

Nice to see lots of comments.
It makes it much easier to understand the code.
Why are you setting the pre-scaler to 1mS ?
Choose a pre-scaler value that gives you the 0.01 Hz precision you want .
You could just leave it a 60MHz.

Yes sir checking the frequency by setting the prescaler value for 0.01hz,
will try setting the value correctly again.

Thank you