Discussion in "8051 Discussion Forum" started by    wounder    Jan 25, 2020.
Sat Jan 25 2020, 12:14 PM
#1
I have a 8051 micro controller ,it has timer0,1,2,3 with different modes.

in timer0,mode0, i got a sample code (as shown below).

from that code

TH0_INIT=0xFC //[email protected]=12MHz, Period = (10.85/2) [email protected]=22.1184MHz TL0_INIT=0x0F

both TH0,TL0 load with hex values..but could not derive these values from equation below .. (https://exploreembedded.com/wiki/5.8051_Timer_programming) Could you please tell me ,how these hex values derive ??

tick = (1/(Fosc/12)

tick = 12/Fosc$$ For Fosc == 11.0592Mhz, the tick time will be

tick = 12/11.0592M = 1.085069444us = 1.085us

Now the Timer value for the required delay can be calculated as below.

Delay = TimerCount * tick

Count = (Delay/tick)

RegValue = TimerMax- Count RegValue = TimerMax-(Delay/tick) = TimerMax - (Delay/1.085us)

RegValue = TimerMax-((Delay/1.085) * 10^6)$$


#include "SFR_Macro.h"
#include "Function_define.h"

#define TH0_INIT 0xFC //[email protected]=12MHz, Period = (10.85/2)
[email protected]=22.1184MHz
#define TL0_INIT 0x0F


void Timer0_ISR (void) interrupt 1 //interrupt address is 0x000B
{
TH0 = TH0_INIT;
TL0 = TL0_INIT;
P12 = ~P12; // GPIO
toggle when interrupt
}



void main (void)
{
TMOD = 0XFF;
Set_All_GPIO_Quasi_Mode;
TIMER0_MODE0_ENABLE;


clr_T0M;
clr_T1M;

TH0 = TH0_INIT;
TL0 = TL0_INIT;


// set_ET0; //enable Timer0 interrupt
//enable Timer1 interrupt
set_EA; //enable interrupts

set_TR0; //Timer0 run


while(1)
{
TH0 = TH0_INIT;
TL0 = TL0_INIT;
set_TR0;
while(!TF0);
clr_TR0;
P12 = ~P12;
TF0 = 0 ;
}
}
Sun Jan 26 2020, 04:05 AM
#2
For a 12MHz crystal using a normal divided by 12 clock.

For a 5mS delay I get
TH0_INIT=0xEC
TL0_INIT=0x78
What do you get ?

The program you posted uses polling and an interrupt to monitor the timer
and toggle P12, choose one, you can't (at least shouldn't) do both.

Get Social

Information

Powered by e107 Forum System

Conversation

Fri Apr 16 2021, 08:49 AM
Maria Campbell
It looks like you've misspelled the word "temprature" on your website. I thought you would like to know . Silly mistakes can ruin your site's credibility. I've used a tool called SpellScan.com in the past to keep mistakes off of my website.-Maria
Thu Apr 15 2021, 11:47 PM
Rachel Cohen
{
Wed Apr 14 2021, 07:42 PM
Harmanjsj
only
Wed Apr 14 2021, 05:05 PM
Valencia
Thank you for some other excellent article. Where else may anyone get that type of info in such a perfect manner of writing? I have a presentation subsequent week, and I'm on the search for such info. viagra otc https://viagrasildenafilok.com/
Wed Apr 14 2021, 03:56 PM
Maritza
Hello, i think that i noticed you visited my web site thus i came to return the prefer?.I am attempting to in finding issues to improve my website!I assume its good enough to make use of a few of your ideas!! https://auto.rifugiofiori.it/docbook-sample.pdf Katja

Downloads

Comments

Mirza123
Thu Jun 25 2020, 03:46 PM
eunicelove124
Mon Jun 22 2020, 03:03 PM
cerouno
Tue Jun 16 2020, 05:10 PM
Marce
Sat Jun 13 2020, 09:43 PM
Davidthils
Thu May 21 2020, 12:44 PM
Jakeror
Thu May 21 2020, 01:28 AM
motorCar
Wed May 20 2020, 07:05 PM
Vordrync
Wed May 20 2020, 11:52 AM

Online

Guests: 114, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38215
Newest member: Mirza123